Rough out each wall, check everything adds up, then copy the cabinet sizes into CabMaster. Auto-fill splits the leftover space into cabinets for you.
Drawing
Pinch to zoom, drag to move. Double-tap to fit.
Saved on this device
Recommend a layout
Lays out the bench runs on the ticked walls and saves it as a new version, so this one stays as it is. Rules: sink centred on the window (if there is one) with a 600 dishwasher and 450 bin beside it · underbench oven with no drawer under it · drawers 500, 550 or 600 · corner unit where two runs meet · tall cabinets, fridge, gaps and laundry items stay where they are.
Colours, door style & handles
Door colour, profile and handles, the benchtop colour and the kick. These drive the 3D model and the drawings; the finish level that sets the price is on the Benchtop step.
Benchtop
Photo of the colour (3D)
Floor & tall cabinets
Wall cabinets
Kickboards
Handles
These apply to the whole job. Colour lists follow the polytec range for the chosen material (availability guide, October 2026) and the WK Quantum Zero range for stone (silica-free, replacing Quantum Quartz); you can still type any colour, such as a Dulux colour for poly doors. Carcasses are 16.5mm white. Door thickness comes from the material and flows into the panels, fillers and benchtop depth.
Kenross standards
Floor cabinets 565 deep (600 overall). Wall cabinets 300 deep (350 with door). 16.5mm white carcass.
Door style & colours
Door material, handles, kick and wall colours are under 3D → Colours. The finish level that sets the price is on the Benchtop step.
Floor cabinets, left to right
Wall cabinets, left to right
Wall cabinets start at the left end of the wall. To leave space over a pantry or fridge, put a "Gap / no cabinet" of that width first, or tap Line up with floor cabinets to rebuild them over the floor cabinets (gaps over pantries and fridges).
Ends of this wall
Side walls are room walls that run out from the end of this wall into the room, for example a short 600 nib beside a pantry. "Full" runs it across to the facing wall. End panel for an exposed end. Wall filler (30) where the cabinets meet a wall. Corner piece (69 × 69) where another run meets this one, so drawers and doors clear.
Windows, doors and ceiling
Floor plan position
Benchtop corners
Island
For seating, extend the benchtop about 300 at the back or past an end (Quick seating does this). A dead corner in the island can open off the back: pick "Cupboard opening off the back" on the corner. Back panels are priced per lineal metre (BBL / RBBL); waterfall ends are in the benchtop material.
Start is the left end of the wall as you face it. Cabinets sit on the room side.
Elevation
Tape measure on: tap two points on any drawing or the 3D view. Snaps to edges (hold Shift to stop). Esc to finish.
Tap a cabinet in any drawing to select it, then move it along the wall (arrow keys work too). Tap a dimension to hide it or move its row. Dashed triangle points to the hinge side. Drawers show each front. Orange dashed outlines show windows and doors, so you can see anything that runs into them. Codes are the Kenross price codes (F60 = floor 600, P90 = pantry 900, W80 = wall 800). Odd widths use the next size up.
Plan
Arcs show door swings. Orange dashes are wall cabinets above. Windows and doors show as gaps in the wall.
Floor plan — whole job
Places the walls for you, in the order of the wall tabs: back wall first, then the side walls. A free-standing wall becomes the island. Missing walls are added. You can still fine-tune each wall under Floor plan position.
Drag a wall on the plan to move it. Tap a wall to select it.
3D view
A quick 3D mock-up of every wall on the floor plan, in this job's door and benchtop colours. Drag to turn it, pinch or scroll to zoom.
Benchtops
Top view of every benchtop piece against the walls. Dashed boxes are the sink and cooktop cut-outs (front dimensions run to the centre of each); orange dashes are corner joins. Save image or PDF gives a supplier-ready sheet with sizes only — no materials, colours or cabinet details.
Cabinet list — all walls
Sizes are the overall cabinet sizes clients sign off on. Internals are worked out at the factory. "Send to quote" copies the list with Kenross price codes; paste it into the Quick Quote.
Cut list — for Paul
Carcass parts for every cabinet in the job, worked out from Paul's floor cabinet sheets: back, two ends, base, shelf and two 2×1 rails per floor cabinet; UDO parts under ovens; the 900 × 900 corner unit; pantry and laundry ends; Häfele or Harn drawer parts. Panels, fillers and kicks are listed in the door material. Wall cabinets and pantry internals aren't on Paul's sheets, so those rows are marked "assumed" for him to check.